ERG-H5
Direct Acting Gas Regulators
ESKA ERG-H5 direct acting gas pressure regulator is used on gas line to reduce inlet pressure to desired outlet pressure.
H5 series is suitable for commercial usage like Gas Skids where max inlet pressure up to 20bar and outlet pressure up to 2,5 bar.
The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.
Compact Design
Housed in a compact and durable body, the ERG H-5 is easy to install even in installation sites with space restrictions
Approvals
he regulators are designed as per EN 334 & EN 88 standards and undergo over 100 testing points during manufacturing
Safety Features
In built Safety relief valve & Over & Under pressure shut off valve allow pressure stabilization & automatic line cut off during line pressure & flow fluctuations.
Description
ESKA ERG-H5 direct acting gas pressure regulator is used on gas line to reduce inlet pressure to desired outlet pressure. H5 series is suitable for commercial usage like Gas Skids where max inlet pressure up to 20bar and outlet pressure up to 2,5 bar. The regulators are manufactured according to Ped Directive 2014/68/EU. The functional tests are performed according to EN334.
The ERG H-5 can be equipped with an inbuilt OPSO (Slam shut off valve) which works as a security valve and activates itself when the outlet pressure passes OPSO calibration point. OPSO system cuts the gas off, and manual reset is needed to activate the regulator again. Inbuilt Safety relief valve and UPSO are some other integral features of this regulator.
DESIGN AND ACCESSORIES
ERG-H5 Series gas pressure regulator body consists of:
- Valve housing Internal thread
- Set up tool
- Filter
- breather console
- Integrated security valves (OPSO / UPSO / Relief)
- Integrated bypass
Technical Specifications
| Medium | Natural Gas, LPG and Non-Corrosive Gases |
| Presure Class | PN20 |
| Maximum inlet pressure | 6 bar (optional 10 bar -20 bar) |
| Outlet pressure range | 15 mbar to 2,5 bar |
| Flow / Capcity Range | up to 500m3/h |
| Operating temperature | -20... + 60°C (optional : -40... +60°C) |
| Assembly | Vertical and Horizontal Position |
| Filter | as a standard 100 micron pore diameter |